Homepage > application > Cadence SPB Allegro and OrCAD v17.20.058 Hotfix Only (x64)

Cadence SPB Allegro and OrCAD v17.20.058 Hotfix Only (x64)

19-08-2019, 15:52. Posted by: happy2018
Cadence SPB Allegro and OrCAD v17.20.058 Hotfix Only (x64)
x64 | Language:Multilanguage | File Size: 3.69 GB

OrCAD one of the best and most professional software simulation and analysis electronic circuits and electronic design automation software division (Electronic Design Automation or abbreviated EDA) is.OrCAD consists of two words that in fact the state of Oregon was the birthplace of early versions of the software and CAD stands for Computer-aided design and computer design means is formed. Cadence SPB OrCAD OrCAD PCB set to Allegro PCB or also known, including various programs to design schematic, simulation and analysis of electronic is circuits.
Facilities and software features of Cadence SPB OrCAD:
-suitable graphical user environments and display circuit using icons
-OrCAD Capture and Capture CIS schematic design circuits in powerful environment
-Ability to design PCB (Printed Circuit Board stands and means the board or PCB)
-has an extensive library full of components and electronic devices
-Advanced simulation and analysis electronic circuits in a graphical environment PSpice
-environment Orcad PCB Designer / Editor to design and edit PCB
-Ability to interact with MATLAB and Simulink software

System requirements:
Cadence Allegro and OrCAD 17.2-2016 Hardware and Software Requirements:

This section describes the system requirements for Windows.

Cadence Allegro and OrCAD products are integrated directly with Windows;
the products support hardware and peripherals supported by Windows. A list of
hardware and peripherals officially supported by Windows can be obtained from the Microsoft web page.

The products require updating certain Microsoft libraries in the Windows directory.
You must install the Cadence software using either a standalone install or a client install.
You may not be able to point to the software without installing.

Operating System:
Microsoft® Windows® 7 Professional, Enterprise, Ultimate or Home Premium
(64-bit); Windows 8 (64-bit) (All Service Packs); Windows 10 (64-bit); Windows 2008 R2 Server; Windows 2012 Server (All Service Packs).

Note: Cadence Allegro and OrCAD (Including EDM) products do not support
Windows 7 Starter and Home Basic. In addition, Windows Server support does not
include support for Windows Remote Desktop. Windows RT and Tablets are not supported.

Minimum Hardware:
-Intel® Pentium® 4 or AMD Athlon XP 2000 with multi-core CPU
-Ram:8 GB RAM
-Virtual memory at least twice physical memory
-50 GB free disk space
-1,024 x 768 display resolution with true color (16-bit color)
-Broadband Internet connection for some service
-Ethernet card (for network communications and security hostID)
-Three-button Microsoft-compatible mouse

Recommended Hardware:
-Intel® Core™ 2 Duo 2.66 GHz or AMD Athlon 64 X2 5200+
-Note: Faster processors are preferred.
-Disk:500 GB free disk space
-Display:1,280 x 1024 display resolution with true color (at least 32bit color)
-GPU:A dedicated graphics card
-Display:Dual monitors
-Microsoft® Internet Explorer® 11.0 or laterInstallation Guide:
Version 17.2:

Remove the previous version and install the Cadence License Manager 12.06 and the show-license request file, close it. Then the program with the default settings, install it.

Now LicenseManager folder in the folder Crack in the installation program (by default C: \ Cadence)
copy and file it with the Run as administrator LicenseManagerPubKey.bat on the run. Tools folder in
the path C: \ Cadence \ SPB_17.2 copy and run the file and wait for the operation to be performed ToolsPubKey.bat.

LicenseServerConfiguration.exe file to the path C: \ Cadence \ LicenseManager Run as administrator
to run the License.lic files in the folder, enter the crack and without changing
the Double-click Next and then Finish. A new license in the path C: \ Cadence \ LicenseManager
named license.dat is produced, it will run Notepad with only two lines after the DAEMON
cdslmd (including address and port is cdslmd.exe file) and delete the file save.

Finally lmtools.exe file to run the same route and in the tab Start / Stop / Reread first on Stop Server and then click Start Server or ReRead License File again.

! Installing the update cause failure of fluff and not a result of the program and should be done before installing the following:

To install the program and folder names SPB_17.2 change; for example SPB_17.2
The new folder name and file SPB_17.2 SPB_17.2 compnts.dat in the folder in which to
copy. Now update the default path is the folder SPB_17.2 install.

After the installation, the folder and the folder Crack Crack, tools folder in the folder
SPB_17.2 copy and then run the file ToolsPubKey.bat. After the closure of the
window operation, all the files and folders
in the folder to the folder SPB_17.2 SPB_17.2 move. The folder name in the form
of the previous SPB_17.2 SPB_17.2 back

Note:apply Hotfix before apply patch the files (Use Cadence SPB OrCAD 17.2-2016 Crack Fixed from hotfix folder for crack

Whats New:
Fixed CCRs 08-16-2019 SPB 17.2 HF058:
ADW LIBDISTRIBUTI Various DB operations take too long, rebooting server seems to fix the problem
-ADW LIBDISTRIBUTI Lib_dist execution taking too long to run, Capture CIS DBC File appears to be taking the most of the time
-ADW LIBDISTRIBUTI Library distribution fails at cisexport function with error (ORCIS-6250)
-ALLEGRO_EDITOR 3D_CANVAS Allegro 3D Canvas shows split layer
-ALLEGRO_EDITOR EDIT_ETCH 'Glossing - Via Eliminate' shifts traces to another layer
-ALLEGRO_EDITOR INTERACTIV Sub-Drawing: clipboard origin point is not set correctly
-ALLEGRO_EDITOR INTERACTIV Pad Edit displays error for extents (SPMHA1-69) if pads are at 90 or 270 degrees
-ALLEGRO_EDITOR INTERACTIV Exporting a query result changes the working directory
-ALLEGRO_EDITOR MCAD_COLLAB Error encountered when importing IDX file into MCAD tool in HotFix 056
-ALLEGRO_EDITOR MCAD_COLLAB IDX files exported from HotFix 056 cannot be read in MCAD tool (the same files from HotFix 055 can be read)
-ALLEGRO_EDITOR MCAD_COLLAB IDX file created from release 17.2-2016 with Hotfix 056 is not readable in MCAD tools
-ALLEGRO_EDITOR MCAD_COLLAB Export IDX is not working in Hotfix 056 but working in HotFix 055
-ALLEGRO_EDITOR NC Disable undersize regular pad and oversize soldermask pad for start layers
-ALLEGRO_EDITOR REPORTS Cannot generate reports and export ODB on board
-ALLEGRO_EDITOR SHAPE PCB Editor stops responding on updating shapes
-ALLEGRO_EDITOR UI_GENERAL Constraint Manager exits on doing 'Undo' in PCB Editor
-ALLEGRO_EDITOR UI_GENERAL Allegro Constraint Manager closes on clicking Undo in the layout editor
-ALLEGRO_EDITOR UI_GENERAL Show Element incorrectly displays in report window on a single line if an HTML Report is open when show element runs
-CONSTRAINT_MGR UI_FORMS Cannot type dot (.) in DFA Table of Package to Package Spacing in DFA of Constraint Manager.
-INSTALLATION ADW Component Browser does not open if adwservice.exe is not added to the Windows firewall exception list
-INSTALLATION ADW Unable to connect to Component Browser.
-PCB_LIBRARIAN OTHER Cannot open Part Developer with a Venture PCB license (PA3810)
-SIP_LAYOUT IMPORT_DATA Performance issues with die text in and pin use codes, function utcle pwrgnd
-SIP_LAYOUT MULTI_USER Symphony Server rejects the move void commands on a specific shape instance
-SIP_LAYOUT STREAM_IF Database fails to create stream out file
-SYSTEM_CAPTURE EXPORT_PCB System Capture crashes with multiple Export to PCB Layout

Download link:

Links are Interchangeable - No Password - Single Extraction
скачать dle 12.0
Go back